M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR)
#12651
table center posV
[M8]
Set the center position of the table in the vertical axis direction using the machine position.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR)
#12652
table center posT
[M8]
Set the center position of the table in the height axis direction using the machine position.
---Setting range---
-99999.999 to 99999.999 (mm)
IB-1501279-H
Vertical axis table center position (For M system only)
Height axis table center position (For M system only)
688