Mitsubishi Electric M800 Series Manual page 641

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#7947 CERRW1H
Set the error compensation amount in the horizontal axis direction of the table rotating type base-side rotary
axis rotation center.
When table rotating type base rotary axis is I axis rotation, set the position deviation of J axis rotation.
When table rotating type base rotary axis is J axis rotation, set the position deviation of K axis rotation.
When table rotating type base rotary axis is K axis rotation, set the position deviation of I axis rotation.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
#7948 CERRW1V
Set the error compensation amount in the vertical axis direction of the table rotating type base-side rotary
axis rotation center.
When table rotating type base rotary axis is I axis rotation, set the position deviation of K axis rotation.
When table rotating type base rotary axis is J axis rotation, set the position deviation of I axis rotation.
When table rotating type base rotary axis is K axis rotation, set the position deviation of J axis rotation.
---Setting range---
-99999.999 to 99999.999 (mm)
(Follow as "#1006 mcmpunit Machine error compensation unit".)
(PR) #7950 SLCT_W2
Set in which direction to rotate the table rotating type workpiece-side rotary axis.
If the tool axis is inclined, use the second digit to set the axis direction in which the tool axis is inclined.
0: Invalid
1: I axis rotation
2: J axis rotation
3: K axis rotation
(Note) 0 to 99 can be set from the screen, but if an invalid value is set, the operation error (M01 0127) will
occur when the power supply is turned ON.
---Setting range---
0 to 3
12, 13, 21, 23, 31, 32
(PR) #7951 TIANGW2
Set the inclination angle if the table rotating type workpiece-side rotary axis is inclined. Set the angle regard-
ing CCW direction of the inclined plane as minus direction.
---Setting range---
-359.999 to 359.999 (°)
(Follow as "#1003 iunit Input setup unit".)
(PR) #7952 ROTAXW2
Set the name of the table rotating type workpiece-side rotary axis.
---Setting range---
A,B,C,U,V,W,X,Y,Z
2-digit of A to Z and 1 to 9
0: Mechanical axis specifications
IB-1501279-H
Horizontal axis rotation center error compensation
amount
Vertical axis rotation center error compensation
amount
Rotary axis selection
Inclination angle
Rotary axis name
624