Mitsubishi Electric M800 Series Manual page 591

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#13523 sptc22
Specify the spindle speed at which a changeover to the 2nd step's acceleration/deceleration time constant
is made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13524 sptc23
Specify the spindle speed at which a changeover to the 3rd step's acceleration/deceleration time constant is
made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13525 sptc24
Specify the spindle speed at which a changeover to the 4th step's acceleration/deceleration time constant is
made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13526 sptc25
Specify the spindle speed at which a changeover to the 5th step's acceleration/deceleration time constant is
made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13527 sptc26
Specify the spindle speed at which a changeover to the 6th step's acceleration/deceleration time constant is
made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13528 sptc27
Specify the spindle speed at which a changeover to the 7th step's acceleration/deceleration time constant is
made when the 2nd step gear is selected.
---Setting range---
0 to 99999(r/min)
#13529 spdiv21
Time constant magnification for changeover speed 1 (Gear: 01)
Specify the acceleration/deceleration time constant to be used in a range of the spindle-mode servo control/
spindle synchronization multi-step acceleration/deceleration changeover speed 1 (sptc21) to the spindle
sync multi-step acceleration/deceleration changeover speed 2 (sptc22) when the 2nd step gear is selected.
Set this as a magnification with respect to the spindle-mode servo control/spindle synchronization accelera-
tion/deceleration time constant (spt2).
---Setting range---
0 to 127
IB-1501279-H
Spindle sync multistep acceleration/deceleration
changeover speed 2 (Gear: 01)
Spindle sync multistep acceleration/deceleration
changeover speed 3 (Gear: 01)
Spindle sync multistep acceleration/deceleration
changeover speed 4 (Gear: 01)
Spindle sync multistep acceleration/deceleration
changeover speed 5 (Gear: 01)
Spindle sync multistep acceleration/deceleration
changeover speed 6 (Gear: 01)
Spindle sync multistep acceleration/deceleration
changeover speed 7 (Gear: 01)
Time constant magnification for changeover speed 1
(Gear: 01)
574