Parameter - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
14 Multi CPU Errors (A) [C80]
A01 Hardware failure
Details
The waveform of the voltage out of the specified range has been detected in the power supply module.
A hardware failure has been detected in the power supply module, CPU module, base unit, or extension
cable.
Remedy
Check the waveform of the voltage applied to the power supply module.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the power supply module, CPU module, base unit, or extension cable. Please consult
your local Mitsubishi representative.
A01 Hardware failure
Details
A hardware failure has been detected.
Remedy
Take measures to reduce noise.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the CPU module. Please consult your local Mitsubishi representative.
A01 Hardware failure
Details
A hardware failure has been detected.
Remedy
Take measures to reduce noise.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the CPU module. Please consult your local Mitsubishi representative.
A01 Memory error
Details
An error has been detected in the memory.
Remedy
Take measures to reduce noise.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the CPU module. Please consult your local Mitsubishi representative.
A01 Memory error
Details
An error has been detected in the memory.
Remedy
Take measures to reduce noise.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the CPU module. Please consult your local Mitsubishi representative.
A01 Memory error
Details
An error has been detected in the memory.
Remedy
Take measures to reduce noise.
Reset the CPU module, and run it again. If the same error code is displayed again, the possible cause is
a hardware failure of the CPU module. Please consult your local Mitsubishi representative.
IB-1501279-H 196
3C12
3C13
3C14
3C20
3C21
3C22