Mes-If Db Table; Pc Ip Address - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
(PR) #9807

MES-IF DB Table

[M8]
Set the table name registered by the registration function of each database. Register the table name to which
the following suffix is added in the database.
_FIN: Machining information database registration
_ALM: Alarm information database registration
_USR: User arbitrary information database registration
---Setting range---
Up to 15 characters including alphanumeric characters and '_' (underscore)
[C80]
Not used.
(PR) #11005

PC IP address

[M8]
Set the IP address for the display unit or PC in which machining programs are stored.
Set the IP address for the display unit of which power is turned OFF with automatic power OFF.
When the 3D machine interference check function is enabled, set the IP address of the display unit that is
used for the 3D machine interference check (for M800W only).
(Note) When "0.0.0.0" is input, "192.168.100.2" is automatically set.
* This parameter is dedicated to M800W/M80W with Windows-based display.
PC Subnet
Set the subnet mask for the display unit or PC in which machining programs are stored.
PC Gateway
Set the gateway for the display unit or PC in which machining programs are stored.
---Setting range---
0.0.0.0 to 255.255.255.255
[C80]
Not used.
DB table name
IP address setting
269 IB-1501279-H