Mitsubishi Electric M800 Series Manual page 435

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
bit6: Nose R compensation (for L system only)
Select whether to apply nose R compensation for shapes in a rough cutting cycle.
0: Conventional specification (Default)
The shape after nose R compensation in the final shaping program will be used as rough cutting shape
(when the nose R compensation for the final shaping program).
1: Extended specifications
The shape without nose R compensation in the final shaping program will be used as rough cutting
shape.
bit7: Cut amount (for L system only)
Select the operation to be performed when the program-specified cut amount exceeds the cut amount of the
final shaping program.
0: Conventional specification (Default)
A program error will occur when the program-specified cut amount exceeds the cut amount of the final
shaping program.
1: Extended specification
Rough cutting will be performed by one cut when the program-specified cut amount exceeds the cut
amount of the final shaping program.
IB-1501279-H 418