Mitsubishi Electric M800 Series Manual page 643

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#7960 Rot1 Ang Geo Dev1
When 1st rotary axis is I axis rotation, set the angular deviation of J axis rotation.
When 1st rotary axis is J axis rotation, set the angular deviation of K axis rotation.
When 1st rotary axis is K axis rotation, set the angular deviation of I axis rotation.
---Setting range---
-1.000000 to 1.000000 (deg)
#7961 Rot1 Ang Geo Dev2
When 1st rotary axis is I axis rotation, set the angular deviation of K axis rotation.
When 1st rotary axis is J axis rotation, set the angular deviation of I axis rotation.
When 1st rotary axis is K axis rotation, set the angular deviation of J axis rotation.
---Setting range---
-1.000000 to 1.000000 (deg)
#7962 Rot2 Ang Geo Dev1
When 2nd rotary axis is I axis rotation, set the angular deviation of J axis rotation.
When 2nd rotary axis is J axis rotation, set the angular deviation of K axis rotation.
When 2nd rotary axis is K axis rotation, set the angular deviation of I axis rotation.
---Setting range---
-1.000000 to 1.000000 (deg)
#7963 Rot2 Ang Geo Dev2
When 2nd rotary axis is I axis rotation, set the angular deviation of K axis rotation.
When 2nd rotary axis is J axis rotation, set the angular deviation of I axis rotation.
When 2nd rotary axis is K axis rotation, set the angular deviation of J axis rotation.
---Setting range---
-1.000000 to 1.000000 (deg)
IB-1501279-H
Angular deviation 1 of center line of 1st rotary axis
Angular deviation 2 of center line of 1st rotary axis
Angular deviation 1 of center line of 2nd rotary axis
Angular deviation 2 of center line of 2nd rotary axis
626