M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8997
Hi-speed grph chck
[M8]
Select whether to increase the graphic check speed.
When you select 1 to 3, graphic check becomes faster.
Note however that the workpiece shape is drawn more inward than the programmed path.
The greater the setting value, the faster the graphic check will be.
0: Disable
1: Level 1
2: Level 2
3: Level 3
High-speed graphic check is enabled for the check method 1 only.
#8998
Finish shape view
[M8]
Select whether to enable the finished shape display.
0 : Disable
1 : Enable
[C80]
Not used.
(PR)
#8999
Simul edit - View
[M8]
Select the display format for simultaneous program edit (3 or 4 Edit), which can be selected with the [Display
setting] menu.
0: [2 Edit] and [3 Edit] are selectable.
1: [2 Edit] and [4 Edit] are selectable.
(PR)
#19701
Restrain VNCserver
[M8]
Select whether to restrain the VNC client from connecting to the NC, displaying the NC screen or performing
setting to the NC.
Menu selection may be disabled depending on the set value.
0: Disable the VNC server function.
1: Enable the VNC server function, and allow the VNC client to display the NC screen and to perform set-
ting operation.
2: Enable the VNC server function, and allow the VNC client to display the NC screen, but the available
setting operation is INPUT key only.
VNC password
#19702
[M8]
Specify the password for connecting to the VNC server.
The password is needed for VNC client of an external PC to connect to the server.
---Setting range---
Up to 8 alphanumeric letters
(PR)
#19703
VNC server port
[M8]
Specify the port number for connecting to the VNC server.
The recommended value is 5901.
(Note) If you use the remote desktop function, do not set 5900.
---Setting range---
0 to 65535
IB-1501279-H
314