M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR)
#2675
tcmp_top
[M8]
This parameter is used for the multiple axis synchronization control.
Specify the starting tool offset No. for the axis.
---Setting range---
0 to 999
#14301
valVDC
[M8]
Select whether to enable or disable the variable full-closed torsion compensation.
0: Disable
1: Enable
#14302
VDCtex_sc
[M8]
Specify the magnification of time constant for variable full-closed torsion compensation (VDCtex1 to 8).
When unused, set the parameter to 0.
---Setting range---
0 to 9999 (%)
#14303
VDCpex_sc
[M8]
Specify the magnification of variable full-closed torsion compensation value (+) (VDCpex1 to 8).
When unused, set the parameter to 0.
---Setting range---
0 to 32767 (%)
#14304
VDCnex_sc
[M8]
Specify the magnification of variable full-closed torsion compensation value (-) (VDCnex1 to 8).
When unused, set the parameter to 0.
---Setting range---
0 to 32767 (%)
#14305
VDCtex_sft
[M8]
Specify the shift amount for variable full-closed torsion compensation time constant (VDCtex1 to 8).
When unused, set the parameter to 0.
---Setting range---
-9999 to 9999 (ms)
#14306
VDCpex_sft
[M8]
Specify the shift amount for variable full-closed torsion compensation value (+) (VDCpex1 to 8).
When unused, set the parameter to 0.
---Setting range---
-32768 to 32767 (0.01 μm)
Multiple axis synchronization control: starting tool off-
set No.
Variable full-closed torsion compensation ON
Variable full-closed torsion compensation: time con-
stant magnification
Variable full-closed torsion compensation: compensa-
tion (+) magnification
Variable full-closed torsion compensation: compensa-
tion (-) magnification
Variable full-closed torsion compensation: compensa-
tion time constant shift
Variable full-closed torsion compensation: compensa-
tion value (+) shift
503
IB-1501279-H