Mitsubishi Electric M800 Series Manual page 728

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#81446+20(a-1)
Specify the name of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
Example) Y
---Setting range---
Y, M, L, SB, B, SW, D, R, W
#81447+20(a-1)
Specify the top No. of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
If you specify bit device, set it in increments of 16 points.
Example) 200
---Setting range---
Y: 0 to 5F0
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#81448+20(a-1)
Specify the size (bytes) of PLC device that is sent to Adapter Implicit (OUT) area. (a=1 to 6)
Example) 1
---Setting range---
0 to 500 (bytes)
* Up to 500 bytes in total for all areas
#81560
Specify the No. of PLC project to which connection status is transferred.
---Setting range---
1 to 6
#81561
Specify the name of PLC device to which connection status is transferred.
Example) M
---Setting range---
M, L, SB, B, SW, D, R, W
#81562
Specify the top No. of PLC device to which connection status is transferred.
6 bytes of data starting from the specified device No. are occupied.
---Setting range---
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
Imp A1out dev name
Imp A1out dev No.
Imp A1out dev size
Imp sts Proj No.
Impsts dev name
Imp sts dev No.
711
Adapter function Implicit Message: PLC device name
(OUT)
Adapter function Implicit Message: PLC device top No.
(OUT)
Adapter function Implicit Message: PLC device size
(OUT)
Connection status assigned PLC project No.
Connection status assigned PLC device name
Connection status assigned PLC device top No.
IB-1501279-H