Rio Device Allocation Parameters [M8] - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.20 RIO Device Allocation Parameters [M8]

(PR) #53001 RIO dev assign
[M8]
Select whether the fixed allocation method or arbitrary allocation method is used to assign devices to each
remote I/O unit station.
0: Fixed allocation
1: Arbitrary allocation
(PR) #53011
[M8]
Specify the channel No. of the 1st remote I/O unit station.
* When 0 is set, all the RIO allocation parameters of the 1st station will be disabled.
---Setting range---
0,1 to 3
(PR) #53012
[M8]
Specify the station No. of the 1st remote I/O unit station.
* Set this parameter to be the same as the rotary switch of the remote I/O unit to which PLC devices are
assigned.
---Setting range---
0 to 63
(PR) #53013
[M8]
Specify the name of DI allocation devices for the 1st remote I/O unit station.
* When 0 is set, this will be left blank.
---Setting range---
0, X, R, ZR
(PR) #53014
[M8]
Specify the head device No. of DI allocation devices for the 1st remote I/O unit station.
For device X: Hexadecimal
For others: Decimal
* This parameter changes to 0 if you change the device name DI dev name #n.
* Specify DI dev name #1 ahead of this parameter.
* The devices corresponding to the occupied station of the operation panel cannot be set.
---Setting range---
Decimal: 0 to 65535
Hexadecimal: 0 to FFFF
(PR) #53015
[M8]
Specify the name of DO allocation devices for the 1st remote I/O unit station.
* When 0 is set, this will be left blank.
---Setting range---
0, Y, R, ZR
RIO CH No. #1
RIO Station No. #1
DI dev name #1
DI dev No. #1
DO dev name #1
RIO device allocation method
Remote I/O channel No. for allocation
Remote I/O station No. for allocation
DI device name #1
DI device number #1
DO device name #1
645 IB-1501279-H