Mitsubishi Electric M800 Series Manual page 704

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR) #12633 main chuck pos X
[M8]
Specify the position from the machine zero point in the X axis direction of front chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12634 main chuck pos Y
[M8]
Specify the position from the machine zero point in the Y axis direction of front chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12635 main chuck pos Z
[M8]
Specify the position from the machine zero point in the Z axis direction of front chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12636 sub chuck pos X
[M8]
Specify the position from the machine zero point in the X axis direction of back chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12637 sub chuck pos Y
[M8]
Specify the position from the machine zero point in the Y axis direction of back chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12638 sub chuck pos Z
[M8]
Specify the position from the machine zero point in the Z axis direction of back chuck.
---Setting range---
-99999.999 to 99999.999 (mm)
(PR) #12639 main chuck ax name
[M8]
Specify the name of the axis to move the front chuck with 2nd axis name.
---Setting range---
Two digits between A to Z and 1 to 9
(PR) #12640 sub chuck ax name
[M8]
Specify the name of the axis to move the back chuck with 2nd axis name.
---Setting range---
Two digits between A to Z and 1 to 9
(PR) #12650 table center posH
[M8]
Set the center position of the table in the horizontal axis direction using the machine position.
---Setting range---
-99999.999 to 99999.999 (mm)
Front chuck position X (For L system only)
Front chuck position Y (For L system only)
Front chuck position Z (For L system only)
Back chuck position X (For L system only)
Back chuck position Y (For L system only)
Back chuck position Z (For L system only)
Front chuck moving axis name (For L system only)
Back chuck moving axis name (For L system only)
Horizontal axis table center position (For M system on-
ly)
687 IB-1501279-H