Mitsubishi Electric M800 Series Manual page 658

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#7373 G700 program No.
The setting method is same as "#7323".
#7382 G800 type
The setting method is same as "#7322".
#7383 G800 program No.
The setting method is same as "#7323".
#7392 G900 type
The setting method is same as "#7322".
#7393 G900 program No.
The setting method is same as "#7323".
#7401 ASCII[01] Valid
The ASCII code macro parameters (#7402 to 7405) are validated.
0: Invalid
1: Valid
#7402 ASCII[01] Code
Set the ASCII code used to call macros with the ASCII code.
L system: A,B,D,F,H,I,J,K,M,Q,R,S,T
M system: A,B,F,H,I,K,M,Q,R,S,T
#7403 ASCII[01] Type
Set the macro call type.
0: M98
1: G65
2: G66
3: G66.1
#7404 ASCII[01] Program No.
Set the program No. called with macro call.
---Setting range---
Program name or file name (up to 32 characters)
#7405 ASCII[01] Variable
When the call type is "0", set the variable No. set after the ASCII code.
---Setting range---
100 to 149
#7411 ASCII[02] Valid
The ASCII code macro parameters (#7412 to 7415) are validated.
0: Invalid
1: Valid
#7412 ASCII[02] Code
Set the ASCII code used to call macros with the ASCII code.
L system: A,B,D,F,H,I,J,K,M,Q,R,S,T
M system: A,B,F,H,I,K,M,Q,R,S,T
#7413 ASCII[02] Type
Set the macro call type.
0: M98
1: G65
2: G66
3: G66.1
641 IB-1501279-H