Interfere:2 Rot Axes Object Er; Interfere:1 Rot Axis Object Er; Interf. Selection: Offset Over; Interf:rot Objects Comb. Error - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
1 Operation Errors (M)
M03

Interfere:2 rot axes object er

Details
The solid object set in the interfering object definition is unavailable as an interfering object defined with two
rotary axes.
Remedy
Correct the setting of the solid in the interfering object definition.
M03

Interfere:1 rot axis object er

Details
The solid object set in the interfering object definition is unavailable as an interfering object defined with one
rotary axis.
Remedy
Correct the setting of the solid in the interfering object definition.
M03

Interf. selection: offset over

Details
In the interfering object selection, the interfering object model coordinate system offset 1 has exceeded the set-
ting.
Remedy
Correct the setting of the interfering object model coordinate system offset 1 in the interfering object se-
lection.
M03

Interf:rot objects comb. error

Details
The following selection was made for the rotary interfering objects:
You selected a one-rotary-axis object and two-rotary-axis object at a time.
You selected two or more two-rotary-axis objects.
Remedy
Correct the setting of the n-th interfering object selection.
M50 Workpiece offset unreflected
Details
Any of the following offsets of the selected modal has not been reflected in the workpiece position counter:
workpiece offset, extended workpiece offset, external workpiece offset or workpiece shift.
Remedy
The warning is cancelled by any of the following operations.
Cycle start
Reset
Emergency stop
M90 Parameter set mode
Details
The setup parameter lock is released.
Cycle start is disabled when setup parameters can be set.
Remedy
Refer to the manual issued by the machine tool builder.
M97 Maintenance part activated
Details
Activated maintenance part has not completed the product procedures.
Remedy
Contact our service center.
IB-1501279-H
2005
2006
3001
3002
36
Interference object defi-
nition number
Interference object defi-
nition number
Interference object defi-
nition number
Interference object defi-
nition number
5000