Protocol Reporting Via Ieee 1344 And C37.118 Pmureport - ABB RES670 Technical Manual

Section 6
Wide area measurement system
Name Values (Range)
PMUReportUDP5 1 - 2
UDPDestAddres5 0 - 16
UDPDestPort5 1024 - 65534
SendCfgOnUDP5 Disabled
Enabled
TCPportUDPdataCtrl6 1024 - 65534
SendDataUDP6 Disabled
Enabled
SetByProtocol
ProtocolOnUDP6 IEEE1344
C37.118
PMUReportUDP6 1 - 2
UDPDestAddres6 0 - 16
UDPDestPort6 1024 - 65534
SendCfgOnUDP6 Disabled
Enabled
6.2
6.2.1
6.2.2
110
Unit Step
- 1
IP 1
Address
- 1
- -
- 1
- -
- -
- 1
IP 1
Address
- 1
- -
Protocol reporting via IEEE 1344 and C37.118
PMUREPORT
Identification
Function description
Protocol reporting via IEEE 1344 and
C37.118
Functionality
The phasor measurement reporting block moves the phasor calculations into an IEEE
C37.118 and/or IEEE 1344 synchrophasor frame format. The PMUREPORT block
contains parameters for PMU performance class and reporting rate, the IDCODE and
Global PMU ID, format of the data streamed through the protocol, the type of reported
synchrophasors, as well as settings for reporting analog and digital signals.
Default Description
1 PMUREPORT instance used for UDP client
group5
234.5.6.11 UDP destination address for UDP client
group5
8914 UDP destination port for UDP client group5
Disabled Send Config frame2 on UDP for group5
4718 TCP port for control of data sent over UDP
client group6
Disabled Send data to UDP client group6
C37.118 Select protocol for UDP client group6
1 PMUREPORT instance used for UDP client
group6
234.5.6.12 UDP destination address for UDP client
group6
8915 UDP destination port for UDP client group6
Disabled Send Config frame2 on UDP for group6
IEC 61850 IEC 60617
identification identification
PMUREPORT -
Phasor measurement unit RES670 2.2 ANSI
1MRK 511 408-UUS A
GUID-0C45D2FA-1B95-4FCA-B23B-A28C2770B817 v1
GUID-0090956B-48F1-4E8B-9A40-90044C71DF20 v1
ANSI/IEEE C37.2
device number
-
GUID-8DF29209-252A-4E51-9F4A-B14B669E71AB v4
Technical manual