Settings - ABB RES670 Technical Manual

1MRK 511 408-UUS A
15.8.9.3
Table 322: SRMEMORYQT Group settings (basic)
Name Values (Range)
Memory Disabled
Enabled
15.8.9.4
15.8.10
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Table 321: SRMEMORYQT Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN

Settings

Unit Step
- -
Technical data
Table 323: Number of SRMEMORYQT instances
Logic block
3 ms
SRMEMORYQT -
Settable timer function block TIMERSETQT
The Settable timer function block (TIMERSETQT) has two outputs for delay of the
input signal at pick-up and drop-out. The timer has a settable time delay (t). It also has
an Operation setting On/Off that controls the operation of the timer.
When the output changes value, the timestamp of the output signal is updated. The
supported "quality" state bits are propagated from the input to the output at each
execution cycle. A change of these bits will not lead to an updated timestamp on the
output.
TIMERSETQT can propagate the quality, value and the timestamps of the signals via
IEC 61850.
Description
Output signal
Inverted output signal
Default Description
Enabled Operating mode of the memory function
Quantity with cycle time
8 ms
10
Section 15
Logic
PID-3814-OUTPUTSIGNALS v5
PID-3814-SETTINGS v5
GUID-341562FB-6149-495B-8A63-200DF16A5590 v1
100 ms
30
GUID-582D9F19-9974-40D6-95EB-7BAD72910748 v2
GUID-3830BCA7-4876-481E-B5AC-2104675232E7 v5
457