Security Events On Protocols Secalarm - ABB RES670 Technical Manual

Section 19
Station communication
19.9
19.9.1
19.9.1.1
19.9.1.2
Table 555: SECALARM Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
19.10
19.10.1
724

Security events on protocols SECALARM

Security alarm SECALARM
Signals
Table 554: SECALARM Output signals
Name Type
EVENTID INTEGER
SEQNUMBER INTEGER
Settings
Unit Step
- -
Activity logging parameters ACTIVLOG
Activity logging ACTIVLOG
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be
configured with IP address; IP port number and protocol format. The format can be
either syslog (RFC 5424) or Common Event Format (CEF) from ArcSight.
Description
EventId of the generated security event
Sequence number of the generated security event
Default Description
Enabled Operation On/Off
Phasor measurement unit RES670 2.2 ANSI
1MRK 511 408-UUS A
GUID-205B0024-DA06-4369-8707-5E1D2D035995 v2
PID-3430-OUTPUTSIGNALS v6
PID-3430-SETTINGS v6
GUID-BED7C3D6-6BE3-4DAC-84B3-92239E819CC0 v1
Technical manual