ABB RES670 Technical Manual page 879

1MRK 511 408-UUS A
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Test
Surge immunity test
Power frequency immunity test
Conducted common mode
immunity test
Power frequency magnetic field
test
Pulse magnetic field immunity
test
Damped oscillatory magnetic field
test
Radiated electromagnetic field
disturbance
Radiated electromagnetic field
disturbance
Conducted electromagnetic field
disturbance
Radiated emission
Radiated emission
Conducted emission
Table 683: Insulation
Test
Dielectric test
Impulse voltage test
Insulation resistance
Table 684: Environmental tests
Test
Cold operation test
Cold storage test
Dry heat operation test
Dry heat storage test
Change of temperature test
Damp heat test, steady state
Damp heat test, cyclic
Type test values
2-4 kV, 1.2/50 ms
high energy
150-300 V
15 Hz-150 kHz
1000 A/m, 3 s
100 A/m, cont.
1000 A/m
100 A/m
20 V/m, 80-1000 MHz
1.4-2.7 GHz
20 V/m
80-1000 MHz
10 V, 0.15-80 MHz
30-5000 MHz
30-5000 MHz
0.15-30 MHz
Type test values
2.0 kV AC, 1 min.
(SFP galvanic RJ45: 1.0 kV,
1 min.)
5 kV, 1.2/50 ms, 0.5 J
> 100 MW at 500 VDC
Type test value
Test Ad for 16 h at -25°C
Test Ab for 16 h at -40°C
Test Bd for 16 h at +70°C
Test Bb for 16 h at +85°C
Test Nb for 5 cycles at -25°C to
+70°C
Test Ca for 10 days at +40°C and
humidity 93%
Test Db for 6 cycles at +25 to
+55°C and humidity 93 to 95% (1
cycle = 24 hours)
Section 23
IED hardware
Reference standards
IEC 60255-26, Zone A
IEC 60255-26, Zone A
IEC 61000-4-16, Class IV
IEC 61000-4-8, Class V
IEC 61000–4–9, Class V
IEC 61000-4-10, Class V
IEC 60255-26
IEEE/ANSI C37.90.2
IEC 60255-26
IEC 60255-26
IEEE/ANSI C63.4, FCC
IEC 60255-26
Reference standard
IEC 60255-27
ANSI C37.90
IEEE 802.3-2015,
Environment A
Reference standard
IEC 60068-2-1
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-2
IEC 60068-2-14
IEC 60068-2-78
IEC 60068-2-30
873