ABB RES670 Technical Manual page 721

1MRK 511 408-UUS A
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Measurands in private range, I103MEASUSR
Number of instances: 3
Function type parameter for each block in private range.
Information number must be selected for measurands.
Table 547: I103MEASUSR supported indications
INF FUN
1) 2)
* *
* *
* *
* *
* *
* *
* *
* *
* *
1) * User defined information value (PARAM.3)
2) * User defined information value (PARAM.2)
3) 9 = Measurands II, Format = Measurand II (7.3.1.8 in IEC 60870-5-103:1997), semantics per IE is
defined by semantics of connected source.
<Number of information elements> is defined by index of first input not connected.
Example: Input1, Input2, and Input4 are connected, Input3 is not connected.
<Number of information elements> will be 3 (Input3 NOT connected) -1 = 2, that is,
only Input1 and Input2 will be transmitted.
Disturbance recordings
The following elements are used in the ASDUs (Application Service Data Units)
defined in the standard.
Analog signals, 40-channels: the channel number for each channel has to be specified.
Channels used in the public range are 1 to 8 and with:
GI TYP
No, polled
3)
*
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
No, polled *
with CL2
Section 19
Station communication
COT Description
2,7 Meas1
2,7 Meas2
2,7 Meas3
2,7 Meas4
2,7 Meas5
2,7 Meas6
2,7 Meas7
2,7 Meas8
2,7 Meas9
M11874-431 v5
M11874-467 v7
715