Automationbits, Command Function For Dnp3.0 Autobits - ABB RES670 Technical Manual

Section 14
Control
14.5
14.5.1
14.5.2
394
PSTO is the universal operator place selector for all control functions.
Although, PSTO can be configured to use LOCAL or ALL operator
places, only REMOTE operator place is used in SPC8GAPC function.
AutomationBits, command function for DNP3.0
AUTOBITS
Identification
Function description
AutomationBits, command function for
DNP3
Functionality
Automation bits function for DNP3 (AUTOBITS) is used within PCM600 to get into
the configuration of the commands coming through the DNP3 protocol. The
AUTOBITS function plays the same role as functions GOOSEBINRCV (for IEC
61850) and MULTICMDRCV (for LON).
IEC 61850 IEC 60617
identification identification
AUTOBITS -
Phasor measurement unit RES670 2.2 ANSI
1MRK 511 408-UUS A
SEMOD158589-1 v3
GUID-C3BB63F5-F0E7-4B00-AF0F-917ECF87B016 v4
ANSI/IEEE C37.2
device number
-
SEMOD158591-5 v8
Technical manual