Function Commands For Iec 60870-5-103 I103Cmd - ABB RES670 Technical Manual

1MRK 511 408-UUS A
Name Values (Range)
GiNo1 Excluded
Included
GiNo2 Excluded
Included
GiNo3 Excluded
Included
GiNo4 Excluded
Included
GiNo5 Excluded
Included
GiNo6 Excluded
Included
GiNo7 Excluded
Included
GiNo8 Excluded
Included
19.7.10
19.7.10.1
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Unit Step
- -
- -
- -
- -
- -
- -
- -
- -
The FunctionType parameter associates a particular instance of the function block
with a FUN. Refer to the IEC 60870-5-103 standard for details.
The InfNon parameters are used to associate each individual input signal with a
userdefined INF. Refer to the IEC 60870-5-103 standard for details.
The TypNon parameters determine if messages use absolute or relative time. This
adheres to the TYPE IDENTIFICATION (TYP) message types 1 (time-tagged
message) and 2 (time-tagged message with relative time) of the IEC 60870-5-103
standard.
The GiNon parameters determine whether a message is sent as a part of a GI reply or
not. Refer to the IEC 60870-5-103 standard for details.

Function commands for IEC 60870-5-103 I103CMD

Functionality
I103CMD is a command function block in control direction with pre-defined output
signals. The signals are in steady state, not pulsed, and stored in the IED in case of
restart.
Station communication
Default Description
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Included Response and status change (GI)
Section 19
GUID-86DE9DBA-BE2F-4CC9-B447-1D2D86849EFF v2
GUID-973929FE-292B-42A5-ACF9-BC95E2B16AE1 v2
699