Settings - ABB RES670 Technical Manual

1MRK 511 408-UUS A
15.7.7.3
Table 277: RSMEMORY Group settings (basic)
Name Values (Range)
Memory Disabled
Enabled
15.7.7.4
15.7.8
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Table 276: RSMEMORY Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN

Settings

Unit Step
- -
Technical data
Table 278: Number of RSMEMORY instances
Logic block
3 ms
RSMEMORY 10
Set-reset with memory function block SRMEMORY
The Set-reset with memory function block (SRMEMORY) is a flip-flop with memory
that can set or reset an output from two inputs respectively. Each SRMEMORY
function block has two outputs, where one is inverted. The memory setting controls if,
after a power interruption, the flip-flop resets or returns to the state it had before the
power interruption. The input SET has priority.
Table 279: Truth table for SRMEMORY function block
SET RESET OUT
0 0 Last
value
0 1 0
1 0 1
1 1 1
Description
Output signal
Inverted output signal
Default Description
Enabled Operating mode of the memory function
Quantity with cycle time
8 ms
10
NOUT
Inverted
last value
1
0
0
Section 15
Logic
PID-3811-OUTPUTSIGNALS v5
PID-3811-SETTINGS v5
GUID-BE6FD540-E96E-4F15-B2A2-12FFAE6C51DB v1
100 ms
20
IP11020-1 v2
M11485-3 v4
439