Settings - ABB RES670 Technical Manual

1MRK 511 408-UUS A
19.4.8.5
Table 484: GOOSEINTRCV Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
19.4.8.6
Phasor measurement unit RES670 2.2 ANSI
Technical manual
visible and possible to make only if Easy GOOSE engineering is
enabled. For instructions on how to enable Easy GOOSE engineering in
PCM600, refer to the Engineering Manual.
Table 482: GOOSEINTRCV Input signals
Name Type
BLOCK BOOLEAN
SRCINTOUT INTEGER
Table 483: GOOSEINTRCV Output signals
Name Type
INTOUT INTEGER
DATAVALID BOOLEAN
COMMVALID BOOLEAN
TEST BOOLEAN

Settings

Unit Step
- -
Operation principle
The DATAVALID output will be HIGH if the incoming message is with valid data.
The COMMVALID output will become LOW when the sending IED is under total
failure condition and the GOOSE transmission from the sending IED does not happen.
The TEST output will go HIGH if the sending IED is in test mode.
Incoming data with q=Normal
Incoming data with q=oldData
Incoming data with q=Invalid
Incoming data with q=test
Table continues on next page
Station communication
Default Description
0 Block of function
0 Source to integer output
Description
Integer output
Data valid for integer output
Communication valid for integer output
Test output
Default Description
Disabled Operation Disabled/Enabled
Data Value Data Valid
Updated 1
Freeze 0
Freeze 0
Freeze 0
Section 19
PID-6829-INPUTSIGNALS v3
PID-6829-OUTPUTSIGNALS v3
PID-6829-SETTINGS v3
GUID-5BBDF772-3B3E-4F7C-ABE9-18CE3C1A2E2D v4
Comm Valid Test
1 0
1 0
1 0
1 1
637