Operation Principle - ABB RES670 Technical Manual

1MRK 511 408-UUS A
22.6.4
22.7
22.7.1
22.7.2
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Name Type
BI8 BOOLEAN
BI9 BOOLEAN
BI10 BOOLEAN

Operation principle

The Signal matrix for binary inputs (SMBI) function , see figure 298, receives its
inputs from the real (hardware) binary inputs via the Signal Matrix Tool (SMT) or
ACT, and makes them available to the rest of the configuration via its outputs, BI1 to
BI10. The inputs and outputs, as well as the whole block, can be given a user defined
name. These names will be represented in SMT as information which signals shall be
connected between physical IO and SMBI function. The input/output user defined
name will also appear on the respective output/input signal.
Signal matrix for binary outputs SMBO
Functionality
The Signal matrix for binary outputs (SMBO) function is used within the Application
Configuration Tool (ACT) in direct relation with the Signal Matrix Tool (SMT), see the
application manual to get information about how binary inputs are sent from one IED
configuration.
Function block
SMBO
BO1 ^BO1
BO2 ^BO2
BO3 ^BO3
BO4 ^BO4
BO5 ^BO5
BO6 ^BO6
BO7 ^BO7
BO8 ^BO8
BO9 ^BO9
BO10 ^BO10
IEC05000439-2-en.vsd
IEC05000439 V2 EN-US
Figure 299: SMBO function block
Basic IED functions
Description
Binary input 8
Binary input 9
Binary input 10
Section 22
M15305-3 v5
SEMOD55215-1 v2
M15311-3 v5
SEMOD54860-4 v3
783