Settings - ABB RES670 Technical Manual

1MRK 511 408-UUS A
15.16.5
Table 356: INTCOMP Group settings (basic)
Name Values (Range)
EnaAbs Signed
Absolute
RefSource Set Value
Input REF
SetValue -2000000000 -
2000000000
15.16.6
15.16.7
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Table 355: INTCOMP Output signals
Name Type
INEQUAL BOOLEAN
INHIGH BOOLEAN
INLOW BOOLEAN

Settings

Unit Step
- -
- -
- 1
Monitored data
Table 357: INTCOMP Monitored data
Name Type
INEQUAL BOOLEAN
INHIGH BOOLEAN
INLOW BOOLEAN
Operation principle
The comparison can be done in two ways,
• Between 2 inputs, INPUT and REF
• Between INPUT and the value set by the user SetValue.
The selection of reference value for comparison can be done through setting RefSource.
If RefSource is selected as Input REF then the reference value for comparison is taken
Description
Input value is equal to the reference value
Input value is higher than the reference value
Input value is lower than the reference value
Default Description
Signed Selection for absolute or signed comparison
Set Value Selection for reference value either input or
setting
100 Set value for reference
Values (Range) Unit
- -
- -
- -
Section 15
Logic
PID-6928-OUTPUTSIGNALS v2
PID-6928-SETTINGS v2
PID-6928-MONITOREDDATA v1
Description
Input value is equal to the
reference value
Input value is higher than the
reference value
Input value is lower than the
reference value
GUID-E9C1B863-ACA7-45C0-91F1-A51FE38755FE v2
481