Monitored Data - ABB RES670 Technical Manual

1MRK 511 408-UUS A
Name Values (Range)
IAngComp5 -10.000 - 10.000
IAngComp30 -10.000 - 10.000
IAngComp100 -10.000 - 10.000
Table 136: GUPPDUP (37) Non group settings (basic)
Name Values (Range)
GlobalBaseSel 1 - 12
Mode A, B, C
Arone
Pos Seq
AB
BC
CA
A
B
C
8.6.6
8.6.7
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Unit Step
Deg 0.001
Deg 0.001
Deg 0.001
Unit Step
- 1
- -

Monitored data

Table 137: GUPPDUP (37) Monitored data
Name Type
P REAL
PPERCENT REAL
Q REAL
QPERCENT REAL
Operation principle
A simplified scheme showing the principle of the power protection function is shown
in figure 81. The function has two stages with individual settings.
Default Description
0.000 Corr of error betw current and voltage angles
at 5% of Ir
0.000 Corr of error betw current and voltage angles
at 30% of Ir
0.000 Corr of error betw current and voltage angles
at 100% of Ir
Default Description
1 Selection of one of the Global Base Value
groups
Pos Seq Selection of measured current and voltage
Values (Range) Unit
- MW
- %
- MVAr
- %
Section 8
Current protection
PID-3709-MONITOREDDATA v5
Description
Active Power in MW
Active power in % of SBase
Reactive power in MVAr
Reactive power in % of
SBase
SEMOD172136-4 v4
255