Signals - ABB RES670 Technical Manual

1MRK 511 408-UUS A
16.10.4
16.10.5
Table 441: TEILGAPC Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
tAlarm 1.0 - 99999.9
tWarning 1.0 - 99999.9
tAddToTime 0.0 - 99999.9
16.10.6
Phasor measurement unit RES670 2.2 ANSI
Technical manual

Signals

Table 439: TEILGAPC Input signals
Name Type
BLOCK BOOLEAN
IN BOOLEAN
ADDTIME BOOLEAN
RESET BOOLEAN
Table 440: TEILGAPC Output signals
Name Type
ALARM BOOLEAN
WARNING BOOLEAN
OVERFLOW BOOLEAN
ACC_HOUR REAL
ACC_DAY REAL
Settings
Unit Step
- -
Hour 0.1
Hour 0.1
Hour 0.1
Operation principle
Figure 236 describes the simplified logic of the function.
Default Description
0 Freeze the accumulation and block the outputs
0 The input signal that is used to measure the elapsed
time, when its value is high
0 Add time to the accumulation
0 Reset accumulated time
Description
Indicator that accumulated time has reached alarm
limit
Indicator that accumulated time has reached warning
limit
Indicator that accumulated time has reached overflow
limit
Accumulated time in hours
Accumulated time in days
Default Description
Disabled Operation Disabled/Enabled
90000.0 Time limit for alarm supervision
50000.0 Time limit for warning supervision
0.0 Time to add to the accumulation
Section 16
Monitoring
PID-6998-INPUTSIGNALS v1
PID-6998-OUTPUTSIGNALS v1
PID-6998-SETTINGS v1
GUID-C7F91D4E-5942-4006-B7C8-4F499E7DC49D v3
591