Settings - ABB RES670 Technical Manual

Section 15
Logic
15.8.7.3
Table 312: PULSETIMERQT Non group settings (basic)
Name Values (Range)
t 0.000 - 90000.000
15.8.7.4
15.8.8
454

Settings

Unit Step
s 0.001
Technical data
Table 313: Number of PULSETIMERQT instances
Logic block Quantity with cycle time
3 ms
PULSETIMERQT -
Reset/Set function block RSMEMORYQT
The Reset-set function (RSMEMORYQT) is a flip-flop with memory that can reset or
set an output from two inputs respectively. Each RSMEMORYQT function block has
two outputs, where one is inverted. The memory setting controls if, after a power
interruption, the flip-flop resets or returns to the state it had before the power
interruption. For a Reset-Set flip-flop, the RESET input has higher priority than the
SET input.
RSMEMORYQT can propagate the quality, the value and the time stamps of the
signals via IEC 61850.
Table 314: Truth table for RSMEMORYQT function block
RESET SET OUT
0 0
0 1
1 0
1 1
Default
0.010
Range or Value
8 ms 100 ms
10 30 (0.000–90000.000) s
NOUT
Last Inverted last
value value
1 0
0 1
0 1
1MRK 511 408-UUS A
Description
Pulse time length
GUID-61263951-53A8-4113-82B5-3DB3BF0D9449 v1
Accuracy
±0.5% ±10 ms
GUID-095B2670-610E-47AE-A5D3-F3E7C0A56B65 v2
GUID-32A1B759-2ED8-45B3-8385-762167626CE2 v5
Phasor measurement unit RES670 2.2 ANSI
Technical manual
PID-3810-SETTINGS v5