Settings - ABB RES670 Technical Manual

Section 5
Local Human-Machine-Interface LHMI
5.3.4
Table 38: LEDGEN Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
tRestart 0.0 - 100.0
t_MaxTripDelay 0.1 - 100.0
Table 39: GRP1_LED1 Non group settings (basic)
Name Values (Range)
SequenceType Follow-S
Follow-F
LatchedAck-F-S
LatchedAck-S-F
LatchedColl-S
LatchedReset-S
LabelOff 0 - 18
LabelRed 0 - 18
LabelYellow 0 - 18
LabelGreen 0 - 18
78
Table 36: LEDGEN Output signals
Name Type
NEWIND BOOLEAN
ACK BOOLEAN
Table 37: GRP1_LED1 Input signals
Name Type
HM1L01R BOOLEAN
HM1L01Y BOOLEAN
HM1L01G BOOLEAN

Settings

Unit Step
- -
s 0.1
s 0.1
Unit Step
- -
- 1
- 1
- 1
- 1
Description
New indication signal if any LED indication input is set
A pulse is provided when the LEDs are acknowledged
Default Description
0 Red indication of LED1, local HMI alarm group 1
0 Yellow indication of LED1, local HMI alarm group 1
0 Green indication of LED1, local HMI alarm group 1
Default Description
Enabled Operation Disabled/Enabled
0.0 Defines the disturbance length
1.0 Maximum time for the definition of a
disturbance
Default Description
Follow-S Sequence type for LED 1, local HMI alarm
group 1
G1L01_OFF Label string shown when LED 1, alarm group
1 is off
G1L01_RED Label string shown when LED 1, alarm group
1 is red
G1L01_YELLOW Label string shown when LED 1, alarm group
1 is yellow
G1L01_GREEN Label string shown when LED 1, alarm group
1 is green
Phasor measurement unit RES670 2.2 ANSI
1MRK 511 408-UUS A
PID-4114-OUTPUTSIGNALS v5
PID-1697-INPUTSIGNALS v18
PID-4114-SETTINGS v6
PID-1697-SETTINGS v18
Technical manual