Ftp Access With Password Ftpaccs - ABB RES670 Technical Manual

Section 21
Security
21.3
21.3.1
21.3.2
21.3.3
Table 579: FTPACCS Non group settings (basic)
Name Values (Range)
SSLMode FTP+FTPS
FTPS
TCPPortFTP 1 - 65535
PasvPortStart 0 - 65515
PasvPortEnd 0 - 65535
750

FTP access with password FTPACCS

Identification
Function description
FTP access with SSL
FTP access with TLS, FTPACCS
The FTP Client defaults to the best possible security mode when trying to negotiate
with TLS.
The automatic negotiation mode acts on configured port number 21 and server
features, it tries to negotiate with explicit TLS via AUTH TLS. If the specified port is
any other, it tries to negotiate in a similar way.
Using FTP without TLS encryption gives the FTP client reduced capabilities. This
mode is only for accessing disturbance recorder data from the IED.
If normal FTP is required to read out disturbance recordings, create a
specific account for this purpose with rights only to do File transfer.
The password of this user will be exposed in clear text on the wire.
Settings
Unit Step
- -
- 1
- 1
- 1
IEC 61850 IEC 60617
identification identification
FTPACCS -
Default Description
FTPS Support for AUTH TLS/SSL
21 TCP port for FTP and FTP with Explicit SSL
49200 First TCP data port for PASV
49232 Last TCP data port for PASV
Phasor measurement unit RES670 2.2 ANSI
1MRK 511 408-UUS A
GUID-C037D0B0-1AA0-4592-9293-92C7EDED3261 v1
ANSI/IEEE C37.2
device number
-
GUID-9E64EA68-6FA9-4576-B5E9-92E3CC6AA7FD v3
PID-6703-SETTINGS v3
Technical manual