Function Block - ABB RES670 Technical Manual

1MRK 511 408-UUS A
22.8.2
22.8.3
22.8.4
Phasor measurement unit RES670 2.2 ANSI
Technical manual

Function block

SMMI
^AI1 ^AI1
^AI2 ^AI2
^AI3 ^AI3
^AI4 ^AI4
^AI5 ^AI5
^AI6 ^AI6
IEC05000440.vsd
IEC05000440 V3 EN-US
Figure 300: SMMI function block
Signals
Table 607: SMMI Input signals
Name Type
AI1 REAL
AI2 REAL
AI3 REAL
AI4 REAL
AI5 REAL
AI6 REAL
Table 608: SMMI Output signals
Name Type
AI1 REAL
AI2 REAL
AI3 REAL
AI4 REAL
AI5 REAL
AI6 REAL
Operation principle
The Signal matrix for mA inputs (SMMI) function, see figure 300, receives its inputs
from the real (hardware) mA inputs (the MIM boards) via the Signal Matrix Tool
(SMT), and makes them available to the rest of the configuration via its analog outputs,
named AI1 to AI6. The inputs, outputs, as well as the whole block, can be given user-
defined names which will be represented in SMT and ACT.
Default Description
0 SMT connected milliampere input
0 SMT connected milliampere input
0 SMT connected milliampere input
0 SMT connected milliampere input
0 SMT connected milliampere input
0 SMT connected milliampere input
Description
Analog milliampere input 1
Analog milliampere input 2
Analog milliampere input 3
Analog milliampere input 4
Analog milliampere input 5
Analog milliampere input 6
Section 22
Basic IED functions
SEMOD54866-4 v3
SEMOD55924-1 v2
PID-3832-INPUTSIGNALS v5
PID-3832-OUTPUTSIGNALS v5
SEMOD55908-4 v6
785