Andqt Function Block - ABB RES670 Technical Manual

1MRK 511 408-UUS A
15.8.1
15.8.1.1
15.8.1.2
Phasor measurement unit RES670 2.2 ANSI
Technical manual
• TIMERSETQT function has pick-up and drop-out delayed outputs related to the
input signal. The timer has a settable time delay. The function also propagates the
time stamp and the quality of the input signal.
• XORQT XOR function block. The function also propagates the time stamp and
the quality of the input signals. Each block has two outputs where one is inverted.

ANDQT function block

The ANDQT function is used to form general combinatory expressions with boolean
variables. The ANDQT function block has four inputs and two outputs.
Function block
ANDQT
INPUT1 OUT
INPUT2 NOUT
INPUT3
INPUT4
IEC09000297-1-en.vsd
IEC09000297 V1 EN-US
Figure 169: ANDQT function block
Signals
Table 292: ANDQT Input signals
Name Type
INPUT1 BOOLEAN
INPUT2 BOOLEAN
INPUT3 BOOLEAN
INPUT4 BOOLEAN
Table 293: ANDQT Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN
Default Description
1 Input signal 1
1 Input signal 2
1 Input signal 3
1 Input signal 4
Description
Output signal
Inverted output signal
Section 15
Logic
GUID-E3023D85-FDCC-4A5F-99B4-64DA7B4AC5BB v5
GUID-4CEE3C76-A39D-4C33-AD55-88C570210F2B v2
GUID-4543C4C9-FAE2-4328-8DE2-4A5756A020E9 v1
PID-3800-INPUTSIGNALS v6
PID-3800-OUTPUTSIGNALS v6
445