Settings - ABB RES670 Technical Manual

1MRK 511 408-UUS A
15.3.5
Table 240: TMAGAPC Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
PulseTime 0.050 - 60.000
OnDelay 0.000 - 60.000
OffDelay 0.000 - 60.000
ModeOutput1 Steady
Pulsed
ModeOutput2 Steady
Pulsed
ModeOutput3 Steady
Pulsed
15.3.6
Phasor measurement unit RES670 2.2 ANSI
Technical manual
Name Type
INPUT30 BOOLEAN
INPUT31 BOOLEAN
INPUT32 BOOLEAN
Table 239: TMAGAPC Output signals
Name Type
OUTPUT1 BOOLEAN
OUTPUT2 BOOLEAN
OUTPUT3 BOOLEAN

Settings

Unit Step
- -
s 0.001
s 0.001
s 0.001
- -
- -
- -
Operation principle
The trip matrix logic (TMAGAPC) block is provided with 32 input signals and 3
output signals. The function block incorporates internal logic OR gates in order to
provide grouping of connected input signals to the three output signals from the
function block.
Internal built-in OR logic is made in accordance with the following three rules:
Default Description
0 Binary input 30
0 Binary input 31
0 Binary input 32
Description
OR function betweeen inputs 1 to 16
OR function between inputs 17 to 32
OR function between inputs 1 to 32
Default Description
Disabled Operation Disabled/Enabled
0.150 Output pulse time
0.000 Output on delay time
0.000 Output off delay time
Steady Mode for output ,1 steady or pulsed
Steady Mode for output 2, steady or pulsed
Steady Mode for output 3, steady or pulsed
Section 15
Logic
PID-6513-OUTPUTSIGNALS v4
PID-6513-SETTINGS v4
SEMOD52537-5 v8
421