Base Screen Switching With The Touch Switch - Mitsubishi Electric Got 1000 Training Manual

2.3.4

Base screen switching with the touch switch

Operation lamp
Stop
GOT display screen is switched when the screen switching device value is written with
the touch switch.
Example: In the case of device for base screen switching: D0
Screen No. 5
Operation lamp
No.10
Touch switch setting
Screen No. 5
No.10
Screen No. 10
Operation setting: Base switching
Fixed to "10"
The current value of D0 is stored five because the
GOT displays screen No. 5.
Set both of X1 and X2 in OFF with sequence
program, and touch No. 10 touch switch.
The GOT displays screen No. 10 because the
current value of D0 is changed to 10 with the touch
switch.
2 - 8