Table of Contents
Advertisement
8.5 Protective Cover for Oil
Use of the protective cover for oil improves waterproof property, oil resistance, and chemical resistance of the GOT.
8.5.1
Applicable protective cover for oil
The following protective cover for oil is applicable for GT14.
Product name
Protective cover for oil
8.5.2
Installing procedure
POINT
POINT
POINT
Before attaching protective cover for oil
A protective film is attached on the display area when the GOT is shipped. Make sure to remove the protective film
before attaching the protective cover for oil.
For attaching the protective cover for oil to the GOT already mounted on the control panel, follow the procedures as
below.
• Remove the GOT from the control panel.
Make sure to externally shut off all phases of the power supply and remove all cables from the GOT in advance.
• Clean dirt off surfaces of the GOT and control panel.
GOT
Protective Cover For oil
Please do not pull the oil cover
more than the necessity,
and do not bend it extremely.
The seat part and the rubber part
in the display part might flake off.
The corner is hung.
Model name
GT05-50PCO
5.7" protective cover for oil
Protective Cover For oil
GOT
Description
1.
Position the POWER LED frame of the cover to the
POWER LED on the GOT front face, and the direction
of the cover is decided.
2.
One corner of the cover is pulled outside, and it hangs
it on the corner of the front panel of GOT.
8.5 Protective Cover for Oil
8 - 7
8. OPTION
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
