Installing The Sd Card - Mitsubishi Electric GOT2000 Series User Manual

6.12 Installing the SD Card

Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
When using the GOT with an SD card inserted, check the following items.
• GT27, GT25, GT23(Except for GT2505, GT25HS-V)
When inserting a SD card into the GOT, make sure to close the SD card cover.
Failure to do so causes the data not to be read or written.
• GT2505-V, GT25HS-V
Before inserting an SD card into the GOT, turn on the SD Card Access Switch.
Not doing so causes the data not to be read or written.
GT21
・
When inserting an SD card into the SD card unit, make sure to enable the SD card access in the
GOT utility in advance.
The following shows the procedure for installing an SD card.(Described with the GOT rear face facing up.)
CAUTION

6.12 Installing the SD Card

6
6 - 69