Copying The Monitor Data/Os Data Between The Internal Memory And Memory Card (Screen & Os Copy) - Mitsubishi Electric GOT-A900 Series Operating Manual

4. OPERATING THE UTILITY FUNCTION
4.4 Copying the monitor data/OS data between the internal memory and memory card (Screen & OS copy)
(1) Display screen
(2) Features
• Project data stored in the internal memory can be saved to the memory card.
• Project data stored in the memory card can be saved to the internal memory.
• OS data can be backed up by copying them from the internal memory to the
memory card.
(3) Procedure
(a) Basic operation
• Touch
or
• Touching
"Do you want to execute?"
• If you answers Yes to the question, touch
select another option. To quit the backup copy, touch
Utility Menu screen.
(b) To return to the Utility Menu screen:
• Touch
to return to the Utility Menu screen.
(4) On-screen error messages
Message
Cancel write protect
function
Install memory card
Format memory card
Write Error (M-CARD
capacity shortage)
Data transfer error
M-CARD error Data
transfer error
Memory card error
Sample screen
to select options.
will display a message asking you to answer the question
Cause
The memory card is write-protected.
A memory card is not installed on the
GOT.
The installed memory card is not yet
formatted.
Memory card loaded has memory
space less than written data.
Write error occurred in the memory
card during copying, or the memory
card used has no free space.
The hardware of the installed
memory card is defective.
4 - 5
MELSEC
again. Touch or
to return to the
Corrective Action
Release write protection of
the memory card.
Install a memory card on
the GOT.
Format the memory card.
Change the memory card
for the one having enough
memory space.
Change the memory card,
or increase the free space
of the memory card.
Replace the memory card
with a new one.
GOT
to