Setting Sfc Data Storage Location; Reading Comment Files From Sd Card - Mitsubishi Electric GOT2000 Series User Manual

5.3.1

Setting SFC data storage location

■1. Setting SFC data storage location
The selected drive of the GOT (SD card) can store up to 512 files of SFC data (SFC programs, device comments) used
for the sequence program monitor (SFC).
SFC data are stored in the storage location that stores ladder data for the ladder monitor function.
Only drive A (standard SD card) or drive B (USB drive) is usable for storing SFC data.
For the ladder data storage destination setting, refer to the following.
When setting with GOT utility
➠
GOT2000 Series User's Manual (Utility)
When setting with GT Designer3 (GOT2000)
➠ GT Designer3 (GOT2000) Screen Design Manual
5.3.2

Reading comment files from SD card

The sequence program monitor (SFC) uses comment files stored in a SD card installed in the GOT.
■1. Procedure for using comment files stored in SD cards
The following shows the procedure for using a comment file stored in a SD card.
(1) When displaying comments in language set for language switching of GOT utility
Store comment files in a SD card on the PLC read screen.
For how to store comment files in a SD card on the PLC read screen, refer to the following.
➠ 5.4 How to Operate PLC Read Screen
(2) When displaying comments in any language regardless of language set for language switching of
GOT utility
Step 1.
Create a SEQCMNT folder in a SD card.
When the SEQCMNT folder already exists, creating a new SEQCMNT folder is not required.
5.3 Operations for Display
5
5 - 9