Installing The Sd Card - Mitsubishi Electric GOT2000 Series Hardware User Manual
Graphic operation terminal
Hide thumbs
Also See for GOT2000 Series:
- Connection manual (1224 pages) ,
- User manual (654 pages) ,
- Basic training textbook (255 pages)
Table of Contents
Advertisement
6.12
Installing the SD Card
Turning off the GOT while it accesses the SD card results in damage to the SD card and files.
When using the GOT with an SD card inserted, check the following items.
•
GT27, GT25, GT23(Except for GT2505-V, GT25HS-V)
When inserting a SD card into the GOT, make sure to close the SD card cover.
Failure to do so causes the data not to be read or written.
•
GT2505-V, GT25HS-V
Before inserting an SD card into the GOT, turn on the SD Card Access Switch.
Not doing so causes the data not to be read or written.
GT21
・
When inserting an SD card into the SD card unit, make sure to enable the SD card access in the
GOT utility in advance.
The SD card installation procedure differs depending on the GOT model.)
Page 247 GT27, GT25 (except GT25-W and GT2505-V), and GT23
Page 251 GT25HS-V
Page 252 GT21
6 INSTALLATION AND REMOVAL
246
6.12 Installing the SD Card
CAUTION
Advertisement
Table of Contents
Troubleshooting
