Adjusting The Touch Panel Position (Touch Panel Calibration Setting) - Mitsubishi Electric GT16 User Manual

11.3.6

Adjusting the touch panel position (Touch panel calibration setting)


Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the object position
may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position with this
function.
Before adjustment
Run
The [Run] will operate though you
intended to touch the [Stop] button.

Touch panel calibration setting display operation
Main menu
( 10.3 Utility Display)
Touch
[GOT setup]
Stop
GOT setup
Touch panel calibration
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.3 Operation Settings (Settings Regarding Operation)
After adjustment
Run Stop
The [Stop] button can be touched
without fail.
Operation
Touch
[Operation]
Touch
[Touch panel
calibration]
Perform touch panel
adjustment.
11 - 25
9
10
11
12
13
14
15
16