9.3.6
Adjusting the touch panel position (Touch panel calibration setting)
1
Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the
object position may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position
with this function.
Before adjustment
The [Run] will operate though you
intended to touch the [Stop] button.
2
Touch panel calibration setting display operation
Main menu
(
8.3 Utility Display)
Touch
[GOT setup]
Run
Stop
GOT setup
Touch panel calibration
9.3 Operation Settings (Settings Regarding Operation)
9.3.6 Adjusting the touch panel position (Touch panel calibration setting)
After adjustment
Run
Stop
The [Stop] button can be touched
without fail.
Operation
Touch
[Operation]
Touch
[Touch panel
calibration]
Perform touch panel
adjustment.
9
- 53
9
10
11
12
13
14
15
16