Communication Detail Setting - Mitsubishi Electric GT16 User Manual

12.2 Communication Detail Setting

12.2.1 Communication detail setting functions
Function
Communication
parameters setting
Keyword setting
Key word deleting
Key word protection cancel For the FX series PLCs, the program protection status in the PLC can be cancelled.
Keyword protection
12.2.2 Communication detail setting display operation

Communication settings
POINT POINT POINT
(1) Communication parameter setting by GT Designer3
Select [Common Settings]
parameters for each communication driver.
When change the communication parameters after downloading project data, change the setting at
communication detail setting of GOT.
(2) For the Ethernet multiple connection
Touch the driver display BOX of the Ethernet connection, and then the communication detail setting screen of
Channel No. 1 is displayed.
12 - 8
12. COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
12.2 Communication Detail Setting
Set various communication parameters of communication devices.
The settable parameters differ according to the communication device.
For the FX series PLCs, key word for protecting program in the PLC can be set.
For the FX series PLCs, key word for protecting program in the PLC can be deleted.
For the FX series PLCs, the cancelled program protection status in the PLC can be returned to the
protection status again.
[Communication Settings] from GT Designer3 to enter the communication
17. DRAWING SOFTWARE SETTINGS (CONTROLLER SETTING AND COMMON SETTINGS)
Description
1.
Touch the driver display BOX of the communication
parameter to be set in the communication setting
screen.
2.
The screen switches to the detail setting screen.
Set communication parameters from this screen.
Refer to the following for the setting change
operation.
10.3.3 Basic operation of settings change