Managing Messages In The Info Dialog - R&S SGT100A User Manual

®
R&S SGT100A
Dialog "Edit Instrument" does not appear
If this dialog does not open, perform the following:
●
Check whether the instrument is correctly connected to the external PC on which
you work with the R&S SGMA-GUI.
●
Check if the instrument is configured in the R&S SGMA-GUI and perform, if neces-
sary, the steps described in
SGMA-GUI",
●
Select "SGMA-GUI > Setup > Instruments", check the state of the instrument in the
"Configure Instruments > Available Instruments" table and activate it, if disabled.
How to identify an instrument in an instrument set
► To identify the instrument in an instrument set, use one of the device identification
functions:
a) Select "SGMA-GUI > Setup > Instruments > Available Instruments > Instrument
b) Select "SGMA-GUI > Instrument Name > Setup > Remote > Remote Chan-
The green LAN LED on the front panel of the instrument blinks.

6.5.5 Managing Messages in the Info Dialog

How to get additional information on the message
► In the "Info" dialog, click a message to select it.
In the lower section of the dialog, additional information on the highlighted mes-
sage is displayed.
User Manual 1176.8674.02 ─ 07
on page 63.
> Edit > Edit Instrument" and trigger "Device Identify"
nels" and trigger "Device Identify"
Understanding the R&S SGMA-GUI Software
Chapter 6.5.2, "Handling Instruments in the R&S
Working with R&S SGMA-GUI
67