Sense<Ch>:Unit[:Power]; Sense<Ch>[:Power]:Aperture:default:state; Sense<Ch>[:Power]:Aperture:time - R&S SGT100A User Manual

®
R&S SGT100A
Example:
Usage:
Manual operation:
:SENSe<ch>:UNIT[:POWer] <Power>
Selects the unit (Watt, dBm or dBμV) of measurement result display, queried with
READ<ch>[:POWer]?.
Parameters:
<Power>
Example:
Manual operation:
:SENSe<ch>[:POWer]:APERture:DEFault:STATe <UseDefAp>
Deactivates the default aperture time of the respective sensor.
To specify a user-defined value, use the command
APERture:TIMe
Parameters:
<UseDefAp>
Example:
Manual operation:
:SENSe<ch>[:POWer]:APERture:TIMe <ApTime>
Defines the aperture time (size of the acquisition interval) for the corresponding sensor.
User Manual 1176.8674.02 ─ 07
SENSe, READ, INITiate and SLISt Subsystems
R&S NRP-Z81
READ1?
Response:
-55.62403263352178,-22.419472478812476
-55.6 dBm is the measured average level, -22. 4 dBm is the
measured peak level at the given frequency.
Query only
See " Level (Peak) / Level (Average) "
DBM | DBUV | WATT
*RST: DBM
SENS2:UNIT DBM
Selects dBm as unit for the measured value returned by com-
mand READ.
READ2?
Response: 7.34
7.34 dBm are measured by sensor 2.
See " Level (Peak) / Level (Average) "
on page 331.
0 | 1 | OFF | ON
*RST: 1
SENS:POW:APER:DEF:STAT 0
Deactivates the default aperture time of the sensor.
See "Use Default Aperture Time"
Remote Control Commands
on page 225
on page 225
:SENSe<ch>[:POWer]:
on page 228
:
331