[:Source<Hw>]:Bb:arbitrary:wsegment:configure:comment; [:Source<Hw>]:Bb:arbitrary:wsegment:configure:delete; [:Source<Hw>]:Bb:arbitrary:wsegment:configure:level[:Mode] - R&S SGT100A User Manual

®
R&S SGT100A
Parameters:
<Mode>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent <Comment>
This command enters a comment for the configuration file. The configuration file must
be specified with command :BB:ARB:WSEG:CONF:SEL.
Parameters:
<Comment>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete <Filename>
Deletes the configuration file. The configuration files are used to create multi segment
waveform files.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:LEVel[:MODE] <Mode>
This command selects the level mode for the multi segment waveform.
User Manual 1176.8674.02 ─ 07
UNCHanged | HIGHest | USER
UNCHanged
The segments are output with the clock rate defined in the wave-
form file.
HIGHest
The segments are output at the highest available clock rate.
USER
The segments are output with the clock rate defined with com-
mand
[:SOURce<hw>]:BB:ARBitrary:WSEGment:
CONFigure:CLOCk
*RST: UNCHanged
BB:ARB:WSEG:CONF:CLOC:MODE UNCH
selects clock mode unchanged. The segments are output with
the clock rate defined in the waveform file.
See " Clock " on page 89
string
BB:ARB:WSEG:CONF:COMM <3gpp_up>
enters comment "3gpp_up".
See " Comment " on page 87
string
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:DEL 'multi1'
deletes configuration file multi1.inf_mswv.
Setting only
See " Delete " on page 88
Remote Control Commands
SOURce Subsystem
393