R&S SGT100A User Manual page 514

®
R&S SGT100A
Parameters:
<Parity>
Example:
:SYSTem:COMMunicate:SERial:RESource?
Queries the visa resource string for the serial remote control interface. This string is
used for remote control of the instrument.
Return values:
<Resource>
Example:
Usage:
:SYSTem:COMMunicate:SERial:SBITs <SBits>
Sets the number of stop bits for the serial remote control interface.
Parameters:
<SBits>
Example:
:SYSTem:COMMunicate:HISLip:RESource?
Queries the VISA resource string, used for remote control of the instrument with
HiSLIP protocol.
Return values:
<Resource>
Example:
Usage:
Manual operation:
:SYSTem:COMMunicate:PCIexpress:RESource?
Queries the visa resource string for remote control via the PCIe interface.
Return values:
<Resource>
User Manual 1176.8674.02 ─ 07
NONE | ODD | EVEN
*RST: NONE
SYST:COMM:SER:PAR NONE
selects parity NONE.
string
SYSTem:COMMunicate:SERial:RESource?
queries the VISA resource string.
Response: "ASRL1::INSTR"
Query only
1 | 2
*RST: 1
SYST:COMM:SER:SBIT 2
selects 2 stop bits.
string
SYSTem:COMMunicate:HISLip:RESource?
Response: "TCPIP::192.1.2.3::hislip0::INSTR"
Query only
See "Visa Resource Strings"
string
Remote Control Commands
SYSTem Subsystem
on page 259
483