[:Source<Hw>]:Bb:arbitrary:mcarrier:carrier<Ch>:Conflict; [:Source<Hw>]:Bb:arbitrary:mcarrier:carrier<Ch>:Delay - R&S SGT100A User Manual

®
R&S SGT100A
to the center RF frequency shows no phase jump assuming that the carrier is unmodu-
lated.
●
For odd number of carriers:
RoundedCarrierSpacing=1/OutputSignalDuration* round(CarrierSpacing * Output-
SignalDuration);
●
For even number of carriers:
RoundedCarrierSpacing=2/OutputSignalDuration*round(0.5 *CarrierSpacing * Out-
putSignalDuration);
Parameters:
<Spacing>
Example:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:CONFlict?
Queries carrier conflicts. A conflict arises when the carriers overlap.
Return values:
<Conflict>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:DELay <Delay>
Sets the start delay of the selected carrier.
Parameters:
<Delay>
Example:
Manual operation:
User Manual 1176.8674.02 ─ 07
float
Range: 0.0 to 120E6
Increment: 0.01
*RST: 0
Default unit: Hz
BB:ARB:MCAR:CARR:SPAC 10 MHz
sets a carrier spacing of 10 MHz.
See "Carrier Spacing"
0 | 1 | OFF | ON
*RST: 0
BB:ARB:MCAR:CARR2:CONF?
queries the multi carrier conflict state.
Response: 0 no conflict has occurred.
Query only
See " !!! " on page 104
float
Range: 0 to 1
Increment: 1E-9
*RST: 0
Default unit: s
BB:ARB:MCAR:CARR15:DEL 5us
sets a start delay of 50 us for carrier 15.
See " Delay " on page 104
Remote Control Commands
SOURce Subsystem
on page 97
371