[:Source<Hw>]:Bbin:power:rms; [:Source<Hw>]:Bbin:skew; [:Source<Hw>]:Bbin:srate[:Actual]; [:Source<Hw>]:Bbin:srate:source - R&S SGT100A User Manual

®
R&S SGT100A
[:SOURce<hw>]:BBIN:POWer:RMS?
This command queries the rms level of the external digital baseband signal.
Return values:
<Rms>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BBIN:SKEW <Skew>
This command determines the delay between Q and I channel. Positive values repre-
sent a delay for Q versus I.
Parameters:
<Skew>
Example:
[:SOURce<hw>]:BBIN:SRATe[:ACTual] <Actual>
Sets the sample rate of the external digital baseband signal.
Parameters:
<Actual>
Example:
Manual operation:
[:SOURce<hw>]:BBIN:SRATe:SOURce <Source>
This command queries the source for estimating the sample rate of the digital input sig-
nal or defining it by the user.
User Manual 1176.8674.02 ─ 07
float
Range: -100 to 10
Increment: 0.01
*RST: 0
BBIN:POW:RMS
queries the estimated rms level.
Query only
See "Level" on page 241
float
Range: -1E-9 to 1E-9
Increment: 1E-12
*RST: 0
Default unit: s
BBIN:SKEW -23PS
enters a delay between Q and I channel of 23 picoseconds.
float
Range: 400 to 200E6
Increment: 0.001
*RST: 100E6
:SOURce:BBIN:SRATe:ACTual 50E6
See "Sample Rate Value"
Remote Control Commands
SOURce Subsystem
on page 239
406