R&S SGT100A User Manual page 74

®
R&S SGT100A
Use "Graphics > Graphic 1 (Complete)" view to retrieve more information on the gener-
ated signal.
The display confirms the expected EUTRA/LTE 10 MHz spectrum.
To transfer the generated file to the R&S SGT
1. In the R&S WinIQSIM2, select "Transmission > Transmit".
2. In the "Waveform Transmission to Arbitrary Waveform Generator" dialog, select:
a) "Source > Internal (WinIQSIM2)"
b) "Destination > Instrument" and define the file name for the transmitted file.
c) Enable "Automatically Load and Start Waveform > On" and select the required
d) Add a comment to the waveform.
e) Select "Transmit".
User Manual 1176.8674.02 ─ 07
How to Create a Waveform File with R&S WinIQSIM2 and Load it in the ARB
baseband, e.g. "Path A"
First Steps with the Instrument
43