[:Source<Hw>]:Bb:arbitrary:wsegment:next:source; [:Source<Hw>]:Bb:arbitrary:wsegment:sequence:append - R&S SGT100A User Manual

®
R&S SGT100A
Usage:
Manual operation:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:SOURce <Source>
Selects the next segment source, i.e. determines whether the next segment is
switched upon receiving of an external trigger signal or upon executing of software trig-
ger .
Parameters:
<Source>
Example:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend <State>,
Appends a new segment to the selected sequencing play list.
Setting parameters:
<State>
<Segment>
<Count>
<Next>
User Manual 1176.8674.02 ─ 07
Event
See "Execute Next Segment"
INTernal | NEXT
INTernal
Switch over to any segment is triggered manually by means of
the command BB:ARB:WSEG:NEXT:EXEC.
NEXT
The trigger event for switching to the next segment is input on
the NEXT connector.
*RST:
BB:ARB:WSEG:NEXT:SOUR INT
selects internal next segment source.
<Segment>, <Count>, <Next>
ON | OFF
activates/deactivates the appended segment
*RST:
integer
indicates the number of the segment as in the multi segment
waveform file
Range:
integer
defines how many times this segment is repeated
Range:
NEXT | BLANk | ENDLess | SEG0 | SEG1 | ... | SEG31 |
0...maxSegment
determines the action after completing the current segment, like
for instance which segment is processed after the processing of
the current one is finished.
Remote Control Commands
on page 118
INTernal
ON
0 to SegmentCount - 1
1 to 65535
SOURce Subsystem
399